تعداد نشریات | 19 |
تعداد شمارهها | 385 |
تعداد مقالات | 3,153 |
تعداد مشاهده مقاله | 4,300,956 |
تعداد دریافت فایل اصل مقاله | 2,894,083 |
سنجش اثر کاربرد پلی استایرن در کاهش مصرف انرژی ساختمان های مسکونی اقلیم سرد | ||
نشریه علمی اندیشه معماری | ||
مقاله 20، دوره 5، شماره 9، فروردین 1400، صفحه 311-323 اصل مقاله (2.31 M) | ||
نوع مقاله: مقاله علمی پژوهشی | ||
شناسه دیجیتال (DOI): 10.30479/at.2020.12600.1459 | ||
نویسندگان | ||
مهدی شعبانیان1؛ محمدهادی کابلی* 2؛ علی دهقان بنادکی3؛ لیلا زارع4 | ||
1دانشجوی دکتری گروه معماری، واحد تهران غرب، دانشگاه آزاد اسلامی، تهران، ایران | ||
2استادیار گروه معماری، واحد دماوند، دانشگاه آزاد اسلامی، دماوند، ایران | ||
3استادیار گروه سازه، واحد دماوند، دانشگاه آزاد اسلامی، دماوند، ایران | ||
4استادیار گروه معماری، واحد تهران غرب، دانشگاه آزاد اسلامی، تهران، ایران | ||
تاریخ دریافت: 05 اسفند 1398، تاریخ بازنگری: 06 اردیبهشت 1399، تاریخ پذیرش: 07 اردیبهشت 1399 | ||
چکیده | ||
بیان مساله:مصرف بالای انرژی در سکونت گاههای بشری باعث افزایش آلودگیهای محیط شده است. بیش از 40 درصد انرژی کشور در ساختمانها مصرف میشود که بخش عمده آن صرف گرمایش، سرمایش و روشنایی فضاهای داخلی میشود. با اتخاذ تدابیری نظیر بهینهسازی عایقکاری حرارتی پوسته خارجی ساختمان میتوان این روند را کاهش داد. در ساختمانهای مسکونی اقلیم سرد که از بیشترین نوسان دما برخوردار بوده، اهمیت این موضوع بیشتر به چشم میآید. سوال تحقیق: سوال این تحقیق عبارت از این میباشد که کاربرد پلیاستایرن در پوسته خارجی ساختمانهای مسکونی اقلیم سرد، تا چه میزان بر کاهش مصرف انرژی این ساختمانها موثر است؟ اهداف تحقیق: هدف این پژوهش تعیین میزان تاثیر استفاده از پلیاستایرن در کاهش بار حرارتی در ساختمانهای مسکونی اقلیم سرد میباشد. روش تحقیق: این تحقیق، برپایه روش پژوهش شبیهسازی و سپس اعتبارسنجی نسبت به نمونههای واقعی، در قالب 11 واحد مسکونی به سنجش این اثر پرداخته است. مهمترین یافتهها و نتیجهگیری تحقیق: نتایج حاصل از شبیهسازی و سنجش اعتبار آن با نمونههای واقعی در طول مدت پژوهش نشان داد که استفاده از پلیاستایرن در پوسته خارجی ساختمان تا 43 درصد افزایش بار سرمایشی و 27 درصد کاهش بار گرمایشی براساس شرایط هریک از نمونهها در طی ماههای مختلف سال را به دنبال دارد. اثر ترکیبی بارهای سرمایش و گرمایش در مجموع نشان از کاهش بار حرارتی ساختمان به طور کلی در طول یک سال دارد. این کاهش برای واحدهای نمونه اول 25/9 درصد معادل 34802/9 کیلو وات ساعت و برای واحدهای نمونه دوم 32/6 درصد معادل 30648/3 کیلو وات ساعت در طی یک سال میباشد. | ||
کلیدواژهها | ||
ساختمان؛ انرژی؛ اقلیم سرد؛ عایقکاری حرارتی؛ پلی استایرن؛ مسکونی | ||
عنوان مقاله [English] | ||
The effect of polystyrene application on reducing energy consumption in cold climate residential buildings. | ||
نویسندگان [English] | ||
Mahdi Shaabanian1؛ Mohamad Hadi Kaboli2؛ Ali Dehghan banadaki3؛ Leila Zare4 | ||
1PhD student, Department of Architecture, west Tehran Branch, Islamic Azad University, Tehran, Iran. | ||
2Assistant professor, Department of architecture, Damavand branch, Islamic Azad university, Damavand, Iran. | ||
3Assistant professor, Department of Civil, Damavand branch, islamic azad university, Damavand, Iran. | ||
4Assistant Professor, Department of architecture, west Tehran branch, Islamic Azad university, Tehran, Iran. | ||
چکیده [English] | ||
Research Problem: High energy consumption in human settlements has increased environmental pollution. More than 40% ofthe country's energy is consumed in buildings, most of which is spent on heating, cooling and lighting of indoor spaces. This process can be reduced by taking measures such as optimizing the thermal insulation of the exterior shell of the building. This is especially important in cold climate residential buildings, which have the highest temperature fluctuations. Research Question: What effect does the use of polystyrene in the shell have on reducing energy consumption in the cooling and heating sections of residential buildings in cold climates? Research Method: Eleven residential units in the city of Hamadan were selected as a sample and the thermal insulation information of their outer shell, which was based on the use of polystyrene layers, was recorded. The samples were observed for one year in the operation period in terms of the actual amount of energy consumption. Then, a model of each sample was constructed in Design Builder software and energy consumption analysis of each was performed. The results obtained from the software outputs were compared with the actual energy consumption of the samples and the deviation of the software reports from the real state was determined. Then, in the software models, changes were made in the physical shell and by removing polystyrene, the usual materials without thermal insulation were replaced and the energy consumption of the samples was simulated again in the latter case. After applying the deviation due to actual consumption error and simulation to the outputs of the new model, the energy consumption of each sample in the state without thermal insulation was normalized and compared with the consumption in the state with thermal insulation. The Most Important Results and Conclusion: The results showed that the use of polystyrene in the outer shell of the building leads to a 43% increase in cooling load and a 27% decrease in heating load based on the conditions of each sample during different months of the year. The combined effect of cooling and heating loads in total indicates a decrease in the thermal load of the building in general during one year. This decrease is 25.9% equal to 34802.9 kWh for the first sample units and 32.6% equal to 30648.3.3 kWh for the second sample units during one year. | ||
کلیدواژهها [English] | ||
Building, energy, cold climate, thermal insulation, polystyrene, residential | ||
سایر فایل های مرتبط با مقاله
|
||
مراجع | ||
بریمانی، مهدی. کعبینژادیان، عبدالرزاق. 1393. انرژیهای تجدیدپذیر و توسعه پایدار در ایران. انرژیهای تجدیدپذیر و نو. 1: 26-21. http://www.jrenew.ir/article_49019cbac7b85adf6fcc98cb017fa594491b4.pdf بزازان، فاطمه. خسروانی، ندا. 1395. سنجش میزان انتشار دیاکسیدکربن توسط بخشهای مختلف تولیدی و خانوارها ناشی از مصرف انرژی در ایران (رویکرد دادهستانده زیستمحیطی). اقتصاد محیطزیست و منابع طبیعی. 1: 26-1. https://www.noormags.ir/view/fa/articlepage/1184505 جانزاده، امیرحسین. زندیه، مهدی. 1395. امکانسنجی طراحی یک واحد همسایگی صفرانرژی در قزوین. پژوهشهای سیاستگذاری و برنامهریزی انرژی. سال دوم، شماره 3. 132-103. https://www.sid.ir/fa/journal/JournalListPaper.aspx?ID=65066 رامین، هادی. حنفیزاده، پدرام. اخوانبهابادی، محمدعلی. 1395. ضخامت بهینه اقتصادی و حرارتی و محیطزیستی عایق دیوار ساختمانها. مهندسی مکانیک مدرس. دوره 16، شماره 13. 252- 255. https://www.sid.ir/fa/seminar/ViewPaper.aspx?ID=75941 رفیعیان، مجتبی. فتحجلالی، آرمان. داداشپور، هاشم. 1390. بررسی و امکانسنجی تاثیر فرم و تراکم بلوکهای مسکونی بر مصرف انرژی شهر، نمونه موردی شهر جدید هشتگرد. آرمانشهر. 6 : 116-107. http://www.armanshahrjournal.com/article_32676.html رمضانیان، محمدرحیم. بحرکاظمی، مانی. 1390. انتخاب مناسبترین دیوار خارجی ساختمان جهت صرفهجویی در انرژی با تکنیک AHP. انرژی ایران. دوره 14. شماره 3. 32-17. http://necjournals.ir/article-1-263-fa.html غفاریجباری، شهلا. غفاریجباری، شیوا. صالح، الهام. 1392. راهکارهای طراحی مسکن در بهینهسازی مصرف انرژی شهر تهران. پژوهشهای سیاستگذاری و برنامهریزی انرژی. سال اول، شماره 1. 115-132. http://epprjournal.ir/browse.php?a_code=A-10-2-6&slc_lang=fa&sid=1 کسمایی، مرتضی. 1384. اقلیم و معماری. احمدینژاد، محمد. اصفهان: نشر خاک. 293. https://www.arel.ir/fa/News-View-8268.html سالنامه آماری استان همدان. همدان: نشر سازمان مدیریت و برنامهریزی استان همدان، 1394. 697. https://www.amar.org.ir مبحث نوزدهم مقررات ملی ساختمان صرفهجویی در مصرف انرژی. چاپ اول. تهران: نشر توسعه ایران، 1390. 172. https://www.bhrc.ac.ir/nbri Al-Hazmy, Majed M. (2006). Analysis of coupled natural convection conduction effects on the heat transport through hollow building blocks. Energy and Buildings, Volume 38. 515- 521. https://www.sciencedirect.com/journal/energy-and-buildings/vol/38/issue/5
Demirboga, Ramazan . Kan, Abdulkadir . Thermal conductivity and shrinkage properties of modified waste polystyrene aggregate concretes. Construction and Building Materials. Volume 35. 730-734. https://www.sciencedirect.com/journal/construction-and-building-materials/vol/35/suppl/C
Dogan, Battal. Tan, Husamettin. (2019). The Numerical and Experimental Investigation of the Change of the Thermal Conductivity of Expanded Polystyrene at Different Temperatures and Densities. International Journal of Polymer Science, 1-9. https://www.hindawi.com/journals/ijps/2019/6350326/
Li, Jing. Meng, Xi. Gao, Yanna. Mao, Wei. Luo, Tao. Zhang, Lili. (2018). Effect of the insulation materials filling on the thermal performance of sintered hollow bricks. Case Studies in Thermal Engineering, Volume 11. 62-70. https://www.sciencedirect.com/science/article/pii/S2214157X17302757
Sayadi, Ali A. Tapia, Juan V. Neitzert, Thomas. Clifton, G. Charles. (2016). Effects of expanded polystyrene (EPS) particles on fire resistance, thermal conductivity and compressive strength of foamed concrete. Construction and Building Materials, Volume 112. 716- 724. https://www.sciencedirect.com/science/article/abs/pii/S0950061816302756
Sekularac, Jelena Ivanovic. Tovarovic, Jasna Cikic. Sekularac, Nenad. (2016). Application of wood as an element of fac¸ ade cladding in construction and reconstruction of architectural objects to improve their energy efficiency. Energy and Buildings, Volume 115. 85-93. https://www.sciencedirect.com/science/article/abs/pii/S037877881500256X
Vo, Chau V. Bunge, Friedhelm. Duffy, John. Hood. (2011). Advances in Thermal Insulation of Extruded Polystyrene Foams. Cellular Polymers, Volume 30, No. 3. 137- 156. https://journals.sagepub.com/doi/abs/10.1177/026248931103000303?journalCode=crpa
Zhang, Lili. Liu, Zu'an. Hou, Chaoping. Hou, Jiawen. Wei, Dong. Hou, Yuyao. (2019). Optimization analysis of thermal insulation layer attributes of building envelope exterior wall based on DeST and life cycle economic evaluation. Case Studies in Thermal Engineering, Volume 14. 1-9. https://www.sciencedirect.com/science/article/pii/S2214157X18302417 | ||
آمار تعداد مشاهده مقاله: 1,868 تعداد دریافت فایل اصل مقاله: 801 |